ETL Listed 15A power strips have 5 single outlets, on/off switch with in-
tegral circuit breaker, mounting brackets, detachable cord and optional
two-stage surge suppression. The outlets are spaced to accommodate
power supplies (wall- warts). Fast installation with two mounting brack-
ets and hardware( included). Chassis and brackets are steel construction
finished in durable black powder epoxy paint. Detachable IEC cord with
NEMA 5-15P plug.
Low profile design (12”L x 2”H x 2”D ) mounts in rack, on shelf, or
under counter with supplied universal mounting brackets.
Weight: 3 lbs.
ETL Listed in US and Canada (conforms to UL Standard 60065)
Optional two-stage surge/transient suppression with LED status indi-
cators on front; non-ground contaminating (Normal Mode) design
Power Rating: 120VAC, 60 Hz, 15A
(NEC Art. 210.21 [B] rating 12A)
Actuation Switch: Combo on/off rocker switch with 15A circuit breaker
Termination: Detachable 6-ft. IEC cord with molded plug (NEMA 5-
Model No. ACS-1505-SW-SD only:
Max Surge Current: 40,000A
VPR (Ul1449-3): 400V
Endurance: 1000 WCS* (unlimited low level surges)
Response Time: 1 nanosecond
EMI/RFI Noise Atten: 20dB @ 100kHz
Protection Mode: Line to neutral only. No ground contamination.
The Power Strip Lowell Model #ACS-1505-SW shall include five 15A outlets spaced for power supplies and an on/off switch
with integral circuit breaker. Power strip shall measure 12"L x 2"H x 2"D
and shall be ETL Listed to UL standard 60065. It shall be capable of
mounting in the rear of a rack or to wall/shelf surfaces using brackets
provided. Termination shall be by detachable IEC cord with NEMA 5-15P
plug. Chassis shall be steel construction with black powder epoxy finish.
[Optional: Unit shall also include two-stage surge/transient suppression
with LED status indicators on front.]