Model ACS-2010-RPC-HW is a 20A, hardwired power strip with a total of 10 outlets (5 duplex) and a Remote Power Control (RPC) terminal that allows for low voltage on/off switching of devices plugged into the strip. Unit can be com- bined with a variety of remote switches and/or sequencers to achieve a versa- tile, low-voltage method of turning specific equipment on and off from a remote location. Operational convenience combined with the ability to safely control AC power distribution without directly accessing equipment minimizes the poten- tial for accidental or unauthorized system modifications, adjustments or van- dalism.

Power strip features 10 outlets (5 NEMA 5-20R duplex with 4 switched, 1 unswitched), Remote Power Control terminal and mult-mount brackets. Strip terminates to flexible (non-metal) conduit with pigtail leads at the end and a ro- tating connector on the chassis. Conduit length is 6-foot and may be easily trimmed in the field to meet wire looming needs.

Chassis is 30"L x 2"W x 2"H rugged steel construction finished in durable black powder epoxy paint. Assembly is ETL Listed and Made in the USA. The strip is easily installed in nearly any application with versatile outlet orientation facing forward, center or rear using Lowell's Multi-mount brackets. The brackets allow the power strip to be installed easily and in close proximity to equipment that is to be plugged in and remotely switched. Low-voltage cable is then run from the RPC terminal to a remote switch or sequencer.

 Specifications

• Model: ACS-2010-RPC-HW 
• Description: AC Power Strip w RPC 
• Power Rating: 20A, 125 VAC 
• Outlets*: 10 total
• Termination (Hardwire): 6 ft. flex conduit 
• Remote Power Control: Terminal
• Overcurrent Protection: --
• NRTL Listing: ETL
• Size (LxWxH): 30" x 2" x 2"